Anycubic PLA Basic Filament 1kg – Red

Description

Reliable PLA filament for FDM printing | Precise 1.75mm diameter with tight tolerance | Vibrant Red colour | Compatible with all FDM printers | Made from renewable, eco-friendly materials

The Anycubic PLA Basic Filament 1kg in Red is a dependable choice for makers, hobbyists, and educators who want consistent, hassle-free FDM 3D printing. Each spool is evenly wound to prevent tangles and ensure a smooth, uninterrupted feed — reducing the risk of jams and failed prints. With a printing temperature range of 190–230 °C and a recommended printing speed of 50–200 mm/s, it suits a wide range of FDM printers and is ready to use straight out of the box. The filament is made from renewable, plant-based materials, offering a low-odour printing experience with no irritating emissions — a practical choice for home studios and workshops alike. A solid, vibrant Red PLA that delivers reliable results for toys, decorative parts, and creative projects.

Features

• 1.75mm diameter — compatible with FDM 3D printers using 1.75mm filament
• 1kg spool weight for extended print runs
• Neatly wound spool for consistent, tangle-free feeding
• Precise extrusion with bubble-free output
• PLA material — a widely supported and easy-to-print filament type

Specifications

• Colour Code: Red (#CE3845)
• Consumable Type: PLA Filament
• Compatible With: FDM 3D Printers with 1.75mm filament compatibility
• Dry Out Before Use: Recommended
• Drying Condition: 45-50 ℃, 6-8 h
• ACE Compatibility: Compatible
• Nozzle Size: Recommended 0.2 mm or above
• Printing Temperature: 190-230 ℃
• Heated Bed Temperature: 55-56 ℃
• Recommended Printing Speed: 50-200 mm/s
• Cooling Time: 8 s
• Maximum Volume Speed (Flow Rate): 12 mm³/s
• Density: 1.24 g/cm³
• Melt Index: 4~10 g/10 min (190 ℃/2.16 kg)
• Melting Point Temperature: 166 ℃
• Vicat Softening Temperature: 55 ℃
• Heat Deflection Temperature (0.45MPa): 54 ℃
• Young’s Modulus: 2534±85 Mpa
• Tensile Strength: 48±5 Mpa
• Elongation at Break: 8±1%
• Bending Modulus: 3360±100 Mpa
• Bending Strength: 90±3 MPa
• lzod lmpact Strength (X-Y): 22±2 kJ/m²
• Tensile Strength (Z): 26±1 MPa
• Product Weight: 1000g

What's in the Box

• Anycubic PLA Basic Filament 1kg – Red x1