Anycubic PLA Matte Filament 1kg - Black

Description

Fine matte finish that hides layer lines | Clean support removal with no sanding | Pre-configured printing parameters | Compatible with 0.2 mm nozzles and above | 1 kg spool

The Anycubic PLA Matte Filament is designed for makers who want their prints to look as good as they perform. Its fine, uniform matte texture naturally conceals layer lines, making it ideal for decorative parts, display models, figurines, and artistic sculptures where surface quality matters. Supports peel away cleanly without sanding or post-processing, saving you time straight off the build plate. The filament ships pre-configured with factory-tuned parameters, so you can load it and print with confidence — no tedious calibration required. Compatible with any 1.75 mm FDM printer using a 0.2 mm nozzle or larger, it runs at a printing temperature of 190–230 °C and a heated bed temperature of 60–65 °C, with recommended speeds of 50–250 mm/s. A reliable, polished choice for creative prints that deserve a professional finish.

Features

• Fine, uniform matte texture minimises visible layer lines for a polished surface finish
• Supports remove cleanly and effortlessly, leaving a smooth contact area with no sanding needed
• Pre-configured with factory-tuned parameters for consistent results straight out of the box
• Compatible with all 1.75 mm FDM printers using a 0.2 mm nozzle or larger
• Intelligent identification chip supported for seamless ACE Pro integration
• Reusable spool with threaded locking system reduces entanglement and feeding errors
• Compliant with RoHS, REACH, and MSDS/SDS certifications

Specifications

• Colour: Matte Black (#484A49)
• Dry Out Before Use: Recommended
• Drying Condition: 55-65℃, 6-8h
• ACE Compatibility: Compatible
• Nozzle Size: Recommended 0.2 mm or above
• Printing Temperature: 190-230 ℃
• Heated Bed Temperature: 60-65 ℃
• Recommended Printing Speed: 50-250 mm/s
• Cooling Time: 8 s
• Maximum Volume Speed (Flow Rate): 12 mm³/s
• Density: 1.25 g/cm³
• Melt Index: 8±3 g/10 min (190℃/2.16kg)
• Melting Point Temperature: 163 ℃
• Vicat Softening Temperature: 57 ℃
• Heat Deflection Temperature (0.45MPa): 54 ℃
• Young's Modulus: 2600±150 MPa
• Tensile Strength: 38±2 MPa
• Elongation at Break: 13±4%
• Bending Modulus: 3200±100 MPa
• Bending Strength: 67±2 MPa
• lzod lmpact Strength (X-Y): 19±1 kJ/m²
• Tensile Strength (Z): 12±2 MPa
• Filament Type: Aesthetic filaments
• Recommend to Print: Decorative parts, fandom, artworks, anime figurines
• Intelligent Identification: Supported
• Reusable Filament Spool: Supported
• Size: 1KG

What's in the Box

• Anycubic PLA Matte Filament 1kg - Black x1