Anycubic PLA Silk Dual Filament – Black Green

Description

Silk-lustre dual-colour PLA filament | Striking Black Green gradient finish | Adjustable gloss via temperature and speed | Compatible with 0.4 mm+ nozzles | 1 kg spool

The Anycubic PLA Silk Dual Filament in Black Green is designed for makers and hobbyists who want their prints to stand out with a rich, layered aesthetic. Combining deep black and bold green in a single strand, this dual-colour silk PLA produces a flowing gradient effect that shifts and catches the light from every angle, giving decorative prints, fan art, and artworks a premium, polished look. You can fine-tune the surface finish simply by adjusting your nozzle temperature and print speed — a higher temperature or slower speed delivers a high-gloss silky surface, while cooler, faster settings yield a subtler sheen. Compatible with any FDM printer using a 0.4 mm or larger nozzle, it runs cleanly at 210–240 °C with a heated bed set between 55 and 56 °C, and prints reliably at speeds from 50 up to 250 mm/s. Dry the filament at 55–65 °C for 6–8 hours before use for best results.

Features

• Black Greencolour blend produces a lustrous, metallic silk finish
• 1kg spool for extended printing sessions and larger projects
• PLA-based material — easy to print and widely compatible with FDM printers
• Intelligent identification chip compatible with Anycubic ACE Pro for automatic filament recognition
• Resilient and flexible — tested to resist breakage during feeding and multi-colour operation
• Prints at 210–240 °C nozzle temperature; heated bed at 55–56 °C
• Recommended print speed: 50–250 mm/s
• Reusable filament spool with threaded locking system to reduce entanglement

Specifications

• Colour: Black Green
• Package Weight: 1 kg
• Dry Out Before Use: Recommended
• Drying Condition: 55-65℃, 6-8h
• ACE Compatibility: Compatible
• Nozzle Size: Recommended 0.4 mm or above
• Printing Temperature: 210-240 ℃
• Heated Bed Temperature: 55-56 ℃
• Recommended Printing Speed: 50-250 mm/s
• Maximum Volume Speed (Flow Rate): 8 mm³/s
• Density: 1.22 g/cm³
• Melt Index: 9±1 g/10 min (190℃/2.16kg)
• Melting Point Temperature: 164 ℃
• Vicat Softening Temperature: 54 ℃
• Heat Deflection Temperature (0.45MPa): 53 ℃
• Young’s Modulus: 2000±200 MPa
• Tensile Strength: 37±4 MPa
• Elongation at Break: 28±5%
• Bending Modulus: 2400±160 MPa
• Bending Strength: 66±4 MPa
• lzod lmpact Strength (X-Y): 20±2 kJ/m²
• Tensile Strength (Z): 12±4 MPa
• Filament Type: Aesthetic filaments
• Recommend to Print: Decorative parts, fandom, artworks
• Intelligent Identification: Supported
• Reusable Filament Spool: Supported

What's in the Box

• Anycubic PLA Silk Dual Filament – Black Green x1