Anycubic PETG Filament 1KG – Translucent Grey

Description

Translucent grey PETG filament | 1 kg net weight | Prints at 50-250 mm/s | Compatible with all FDM 3D printers and ACE

Quick Specs

• Print in a versatile translucent grey PETG on all FDM 3D printers, with ACE compatibility
• Enjoy a practical 1 kg net weight for projects from small parts to longer runs
• Achieve dependable results with a nozzle range of 230-250 ℃ and a bed range of 60-70 ℃
• Print at speeds from 50-250 mm/s to balance quality and turnaround
• Rely on a tensile strength of 52±1 MPa and bending strength of 80±2 MPa for functional parts

A Translucent Grey PETG Filament for Practical, Functional Prints

The ANYCUBIC PETG Filament in Translucent Grey is made for makers, hobbyists and workshops who want a PETG 3D printer filament that suits both everyday prototypes and functional parts. The smoked translucent grey finish (#6A6C6E) gives your models a distinctive look, while the 1 kg net weight gives you plenty of material for repeat projects. It is compatible with all FDM 3D printers and is ACE compatible, so it fits the setup you already run.

Tired of Guessing Your Print Settings?

Dialling in a new filament can eat up time and material, so clear temperature and speed windows make a real difference. This PETG filament prints with a nozzle temperature range of 230-250 ℃ and a bed temperature range of 60-70 ℃, giving you a defined starting point for your slicer profile. You can print at speeds from 50-250 mm/s, so you can slow down for detail or speed up when you need parts sooner. The melt flow index of 25±3 g/10 min (250℃/2.16kg) describes how the material flows at temperature.

Strength and Flexibility for Functional Parts

PETG is chosen when a part needs to do more than look good, and the published mechanical data reflects that. Tensile strength is 52±1 MPa (Z: 31±3 MPa), with a Young's modulus of 1850±100 MPa and elongation at break of 13±1%. Bending strength is 80±2 MPa with a bending modulus of 2000±50 MPa, and Izod impact strength is 45±2 kJ/m² (X-Y). Together these figures help you plan brackets, enclosures, covers and other practical prints.

Know Your Thermal Limits and Storage Needs

Planning where a printed part will be used is easier when the thermal limits are stated. This filament has a Vicat softening temperature of 72 ℃ and a heat deflection temperature of 69 ℃ (0.45 MPa), with a density of 1.23 g/cm³. Should your spool absorb moisture, the recommended drying temperature and time is 55-65 °C for 6-8 h, helping you return the filament to a ready-to-print condition. With clear data on hand, you can print this ANYCUBIC filament with confidence.

Features

• PETG filament in Translucent Grey (#6A6C6E) for a distinctive smoked finish
• 1 kg net weight for projects from single parts to repeat runs
• Compatible with all FDM 3D printers and ACE compatible
• Nozzle temperature range of 230-250 ℃ and bed temperature range of 60-70 ℃ for a clear slicer starting point
• Printing speed range of 50-250 mm/s to balance detail and turnaround
• Tensile strength of 52±1 MPa and bending strength of 80±2 MPa for functional parts
• Elongation at break of 13±1% and Izod impact strength of 45±2 kJ/m² (X-Y)
• Stated drying guidance of 55-65 °C for 6-8 h to recover moisture-affected filament

Specifications

• Filament Material: PETG
• Density: 1.23 g/cm³
• Melt Flow Index: 25±3 g/10 min (250℃/2.16kg)
• Tensile Strength: 52±1 MPa (Z: 31±3 MPa)
• Young's Modulus: 1850±100 MPa
• Elongation at Break: 13±1%
• Bending Strength: 80±2 MPa
• Bending Modulus: 2000±50 MPa
• Izod Impact Strength: 45±2 kJ/m² (X-Y)
• Melting Temperature: 130 ℃
• Vicat Softening Temperature: 72 ℃
• Heat Deflection Temperature: 69 ℃ (0.45 MPa)
• Nozzle Temperature Range: 230-250 ℃
• Bed Temperature Range: 60-70 ℃
• Printing Speed Range: 50-250 mm/s
• Drying Temperature & Time: 55-65 °C, 6-8 h
• Compatible Printers: All FDM 3D printers; ACE compatible
• Colour: Translucent Grey (#6A6C6E)
• Net Weight: 1 kg

What's in the Box

• 1 x Anycubic PETG Filament 1KG – Translucent Grey

Why ANYCUBIC

Choose ANYCUBIC for a 3D Printer Materials with clearly documented capabilities and specifications, making it easier to select the right fit with confidence.